Professional Manufacturer For All kinds Of Beverage Equipment

The recycling of hot filling technology and traffic control

by:Xinmao     2021-04-10
1. After UHT sterilization equipment external backflow when the material sent to the filling machine, if the temperature of the material is lower than the set value T, material from outside the V4 valve pipe to return to the reheated UHT sterilization, effectively controlling the pouring temperature, this process is called external reflux. 2. Reflow in the process of hot filling, the filling process of different filler material state and stability of each are not identical, both affect the filling speed, easy to produce half a bottle again. Filling machine by produce certain negative pressure suction fan, in the process of filling rapidly inhale and bubbles of air inside the bottle, can not only improve the filling speed, and solves the phenomenon of half a bottle, but also effectively avoid the bottle to bulge and materials produced by other filling way spillover phenomenon. 3. No bottle filling valve under the states of backflow due to various reasons in the process of filling in downtime, may cause the lower temperature inside the cylinder and valve material. At this time by filling valve internal reflux pathway materials can still be at a certain flow in filling process flow, make the cylinder and filling valve with new materials, in order to make the cylinder and the temperature of the filling material in the valve to maintain the required range, meet the needs of real hot filling. 4. Back to flow back to the control of flow control is one of the hot filling machine is very important and key technology, indispensable. Back to too much traffic can cause material repeated heating sterilization cause the change of the taste and flavor of drink, and even affect the immanent quality of drinks. In the best borui filling machine, through filling valve outside hold open the valve on the cylinder, valve CAM, suction fan and electrical control system to control the flow back. When a bottle opening valve cylinder, rotate the lever to open the filling valve, after the materials meet the requirements of the required level in the bottle, closing valve CAM closed filling valve, stop filling; No bottle cylinder action, the filling valve is not filling. And closing valve CAM also can be adjusted according to the material characteristic and the filling state of closing valve position, real effectively control irrigation return flow in the process of loading.
Zhangjiagang City Xinmao Drink Machinery Co., Ltd. who is highly knowledgeable about manufacturing as well as selling and confident in our ability to create finest products as water bottle filling machine manufacturers water filling machine manufacturer.
Review Zhangjiagang City Xinmao Drink Machinery Co., Ltd. 's progress at regular intervals, so we can continue with the strategies that work well and change or eliminate the ones that don't give the results we are looking for.
To do that, Zhangjiagang City Xinmao Drink Machinery Co., Ltd. will need to make sure our business is listed accurately on as many directories as possible, including technology and quality.
water bottle filling machine manufacturers is one of the best products sold in the market today.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...