Liquid filling equipment is widely used in our life, like we usually drink of mineral water, pure water, carbonated drinks;
Cars with a glass of water, fuel, antifreeze, etc is done through the liquid filling equipment.
Liquid filling equipment working process is very simple, will be equipped with empty boxes piled up on the tray, bottle by the conveyor belt to discharge tray machine, remove the tray one by one, the box with the conveyor belt to discharge machine, remove empty bottles from the box, empty the conveyor belt to the washing machine, the clean, and then transported to packing machine, so that the beverage containing bottles into one.
Empty bottles, taken from the discharge machine, by another conveyor belt into the bottle washing machine disinfection and cleaning, the bottle inspection machine, accord with the standard clean after enter the filling equipment and capping machine.
Drink by filling equipment into the bottle.
Good drink bottles, the capping machine affix a seal to labeling machine labeling, labeled after sent to packing machine into the box and then sent to the stack tray stacked on the pallet into the warehouse.
With the development of automatic technology, full automatic liquid filling equipment have good automatic temperature control technology, convenient operation, stable sealing quality.
Is widely used in pharmaceutical, all kinds of beverages, soy sauce packaging of liquid medium, ultraviolet radiation sterilization, packing bag forming, date printing and automatic filling, sealing cutting, etc are completed at once.
Automatic liquid filling equipment promotion make many food drug manufacturers to reduce the cost and improve the economic benefit of enterprise.
But in production provides convenience to our life at the same time, we should also pay attention to the liquid filling equipment cleaning maintenance, guarantee the safety of sanitary conditions.
1, due to the liquid filling liquid filling equipment, therefore fluid filling equipment containers must be kept clean, the use of filling container must go through strict inspection and cleaning, cannot make potions polluted after filling, otherwise it will cause serious hazards for product quality.
2, in addition to filling equipment cleaning, keep filling workshop clean and tidy and very necessary.
Because in the process of production is more taboo because of filling equipment itself quality problems lead to normal operation of the production line, so should pay attention to when using filling equipment sterilization, ensure clean, low temperature filling.
3, keep clean liquid filling equipment pipes.
All piping and indirect or direct contact with the pipe material, in particular, should keep clean, once a week to scrub, water every day, every time sterilization;
Ensure filling equipment clean, its material slot to scrub and sterilization, ensure that all parts in contact with materials not fouling and mixed bacteria.
4, the production process to ensure the biological stability of bottled liquid sterilization.
Good control of sterilization time and temperature, to ensure that the final effect, to avoid the sterilization time is too long or temperature is too high, reduce the liquid oxidation, as soon as possible after the sterilization to cooling temperature is not more than 35 ℃.
5, the filling equipment before each work, will use 0 ~ 1 ℃ water filling equipment tank and pipeline temperature is reduced, when filling temperature of 4 ℃ should be after lowering the temperature in the filling operation.
Using heat preservation tank, constant temperature filling, filling materials in the provisions of the time to keep a constant temperature, lest cause filling equipment working instability due to temperature change is too large.
6, isolated from the rest of the best filling equipment and other equipment, filling equipment lubrication parts and filling material should prevent cross contamination, conveyor lubrication with special soap and water or oil.