Juice of thermal filler filling material with plain water or gas beverage material composition differences, different way of filling and filling process.
Hot juice filling machine
, therefore, the structure and common filling machine filling in cylinder, filling valve and the structure of management system and so on.
Due to the thermal filler filling material ingredients such as juice, tea, coffee, milk and functional components of health drink each are not identical, some high sugar content, some even contain pectin, theophylline, some medium viscosity, some blister easily when filling.
In order to ensure that drinks have longer shelf life and stable quality, therefore requires high temperature filling, usually at about 88 ℃ temperature.
At the same time also require filling cylinder internal structure is smooth, easy to clean, no CIP cleaning dead Angle, parts and materials in contact with the material of 0 cr19ni9 stainless steel, the internal and external surface is smooth, requirement roughness Ra≤
Juice is hot filling machine adopts gravity filling, negative pressure backflow way of filling material after UHT UHT, through the pump to the machine on the cylinder head is constant and for filling the PET bottle, fall under the line of upper filling valve and the filling valve into a PET bottle.
Within the workbench equipped with suction fan at the same time, its suction is connected to a buffer tank, filling the exhauster start, through the buffer tank, the cylinder and return line of the filling valve will air in the PET bottle quickly absorb and formed certain negative pressure, speed up the filling speed, and high level in the bottle to bottle bubble suck and rapid filling into materials to form high level or the bottle filling.
Juice hot filling machine is one of the main equipment in hot filling production line, is by the salt bottle, filling and twist cover unit into the trinity, at the same time also is equipped with material return tank and circulation system, the equipment compact structure, small volume, cover an area of an area small.
Blunt bottle connected to the filling part without conveyor belt, the star wheel transmission.
The machine is fully automatic control, simple operation, easy to filling between the equipment arrangement and the health conditions of control and production management.
Juice hot filling machine within the workbench equipped with suction fan at the same time, its suction is connected to a buffer tank, filling the exhauster, through a buffer tank, cylinder and filling valve will return line of air inside the bottle quickly absorb and formed certain negative pressure, speed up the filling, filling machine principle and high level in the bottle to bottle bubble suck and quickly fill into materials to form high level or the bottle PET bottle filling.
After the principle of filling machine for filling the PET bottle in hot filling requirements of high level behind higher level or the bottle PET bottle filling, to reduce the residual oxygen in the air bottle gap elements impact on beverage quality.
At the same time, the bottle of the heat of the material can also be used to come out some replacement of air, this is advantageous to the process after the inverted bottle to bottle sterilization and inside of the cap top surface, further ensure beverage quality.
The single most important quality you'll need as Zhangjiagang City Xinmao Drink Machinery Co., Ltd. is 'stick-to-it-iveness' or grit, a combination of perseverance, patience and adaptability.
Zhangjiagang City Xinmao Drink Machinery Co., Ltd. seeks to lead the industry by instilling pride in our customers, creating value for the market and sharing responsibility around the world.
Xinmao is designed to enhance your savings in terms of cost, energy and efforts.If you are interested in our water bottle filling machine manufacturers water filling machine manufacturer products, please contact us soon.