Automatic bottle washing machine which can be divided into different types according to different situations?
One, soaking and scrub type bottle washing machine it is through the combined to scrub clean the bottle.
This is a kind of scrubbing the bottle wall cleaning method effectively.
In the past years with brush, because of the easy dropping, life is short, at the same time because of hiding dirt easily and affect the quality of scrub brush.
In recent years, some countries have adopted synthetic materials for the brush, use effect is good.
and equipment of this kind of bottle washing machine wash part of the structure is more complex, because the brush and bottle must be alignment can enter into the bottle, so the use of this type is also not much.
Second, immersion and spray type bottle washing machine taking advantages of soaking and jet, there are one or more of the dip tank and more injection parts, nozzle for high pressure type.
Some think, when the injection part two injection tanks can be substituted to a certain extent, the cleaning effect of high pressure jet can be equivalent to scrub with the brush.
Three, the spray type bottle washing machine including inside and outside of the bottle washing.
The center of the nozzle must be aimed at the center of the bottle.
This type of washing, especially suitable for the crown cover because the bottleneck is small, usually only about 5 mm, with other type of bottle washing machine it is difficult to clean dirt inside the bottle.
Nozzle should be used in high pressure type of detergent.
But this way of washing bottle easy to generate foam, remove the trademark is also more difficult.
In addition, due to the effect solution and carbon dioxide in the air, the concentration will soon reduced, energy consumption is bigger also.
Four, immersion bottle washer once or several times of hot water injection irrigation first, and then in different temperature sink continuous bottle submerged,
After filling empty)
For washing or disinfection.
After the last flood, reoccupy spray rinse several times in order to sweep away the hot and cold water wash.
Accordance with the requirements of the immersion bottle washer and with very little.
Given the important role played by in ensuring proper functioning of water filling machine manufacturer, every individual must take an interest towards improving water filling machine manufacturer.
Above all, we expect to be a credit to the communities we serve, a valuable resource to our customers, and a place where our dedicated water bottle filling machine manufacturers can grow and prosper.
can be used in a wide variety of ways.